 | E-Malt.com News article: Belgium: Beer maker Martens boosts output with new canning line
With an output of over five million hectolitres per annum, Martens is claimed to be Belgium’s biggest family-run brewery and, after AB InBev, the second largest in the country, Food Processing reported on November 20.
Martens’ existing KHS canning lines with capacities of up to 60,000 and 90,000 cans per hour are now being joined by a third. At its Kaulille plant, 8 km from the main production site, a line for up to 120,000 330-mL cans/h has now been installed. On acceptance, the new system achieved an efficiency of 98%.
The SmartCan by KHS/Ferrum plays a key role in the new line’s performance. It blocks the KHS Innofill Can DVD filler with the Ferrum FS18 seamer, which with its 18 stations seals up to 136,000 cans/h. Both machines are configured so that they seamlessly dovetail with one another in synchronisation. This gives maximum precision during seaming — at speeds like these especially, every detail counts. Format changeovers are largely automated and recipe controlled, with no change-part weighing more than 12 kg.
Separate belt and screw drives and an improved can flowgate on the filler lend it a light touch, which is even suitable for thin-walled aluminium cans. Electromagnetic inductive flow metering in each filling valve keeps the filling volume and head space constant. Thanks to the 40% smaller ‘donut’ housing, pneumatic bell guides, PTFE expansion joints and wiring laid in closed pipes, the filler also scores good marks for hygiene.
After being depalletised, the empty cans first overcome a difference in height with the help of a mass vacuum bridge supplied by KHS partner H. F. Meyer, before KHS conveying technology distributes the flow of cans across two parallel lanes.
Here, the cans are fed to the coder by a twin-version HYTRANS V1 vacuum bridge and then checked for foreign bodies and damage by KHS Innocheck ECI inspection units.
Following this, two HYAERO vacuum rinsers sanitise the containers before a HYCOMBI module channels the two tracks back into one upstream of the filler.
Both lanes process up to 90,000 cans per hour apiece.
Downstream of the filler/seamer block, twin inspection technology is designed to ensure that products are flawless. Two KHS Innocheck FHC units monitor the correct fill height and LTCs check for can tightness. The KHS Innocheck MMS filler management system allocates faulty fillings to the respective valve in real time. This allows a specific element to be switched off instead of the entire line having to be shut down.
Parallel machines are also used for packaging and palletising.
Finally, the KHS Innoline Basic Line Monitoring (BLM) production unit provides full transparency: it records the operating states of all machines available on the line, thus highlighting any possible loss in performance and the cause(s) thereof.
Whereas on lots of high-performance lines components such as can conveyors and rinsers are installed on elevated platforms, in Kaulille, production is almost all at shop floor level. This creates transparency and keeps distances short: regular operation of the entire line can be managed by just three employees.
Efficiency isn’t limited to the line layout; Martens also focuses on media and energy consumption.
According to the brewery, just 1.35 L of water is required to produce 1 L of beer — as opposed to the industry-standard three to five.
20 November, 2026
|
|